November 9, 2026 · Buffalo Insulation
How to Insulate an Old Buffalo House Without Tearing Out the Walls
Many Buffalo houses were built before walls were insulated. You don't have to gut them to fix it.

Dense-pack walls through small holes
Installers drill small holes from outside or inside, fill each cavity with dense-packed cellulose, then plug and patch the holes.
Balloon framing
In many older homes, wall cavities run from the basement to the attic. Blocking those channels at the top and bottom stops cold air from running up inside the walls.
Check the wiring first
Live knob-and-tube wiring shouldn't be buried in insulation. A good contractor checks for it at the estimate.
Start with the attic and basement
Even in an older home with empty walls, the attic and basement are usually the best first steps. Sealing and insulating the attic floor and foaming the rim joists cut the biggest air leaks and often make the biggest difference in comfort for the money.
Two-family doubles
Buffalo doubles have an upper and a lower unit with shared walls and stairways. The upper unit gets most of the benefit from attic work, and the lower unit from rim joist and basement work. Dense-pack walls help both. If one unit is rented, plan access for both before work starts.
Plaster, trim and historic details
Insulating from outside, behind the siding, avoids disturbing plaster and trim. If insulation goes in from inside, holes can be drilled in plaster and patched. On homes with historic siding or brick, talk with the contractor about the least visible approach.
Moisture and old houses
Older homes were built to dry out easily, so fix roof leaks, gutters and window flashing before insulating walls. A good contractor will check for moisture problems as part of the estimate.
Key takeaways
Seal the attic floor and the tops and bottoms of balloon-framed walls, insulate the attic to full depth, foam the rim joists, then fill empty walls with dense-pack cellulose. Check for knob-and-tube wiring and vermiculite first, and fix moisture problems before insulating.
What it costs
Dense-pack wall insulation is priced by wall area, and attic and rim joist work by area and depth. See the insulation cost page for typical ranges, and get an on-site estimate for an exact price. Income-eligible homeowners may qualify for help through NYSERDA's EmPower+ program.
Getting started
Send the form with the age of the home and whether it's a single-family or a double. A local contractor will look at the attic, walls and basement and give you a free written quote.
Get a free estimate
Call (716) 625-3353 or send the form and we'll come take a look, anywhere in Buffalo and Western New York.