Buffalo, NY · Serving Western New Yorkinfo@buffalonyinsulation.comFree Estimates: (716) 625-3353
Home / Blown-In Insulation

Buffalo, NY · Western New York

Blown-In Insulation in Buffalo, NY

Fast, affordable loose-fill insulation for attics.

Free Blown-In Insulation Quote

Free on-site estimate · about 30 seconds

What do you need help with?
What type of property is it?
Where is the project?
Last step: who should the contractor call?

By submitting, you agree to be contacted by a local independent contractor about your project.

Free & no obligation

Blown-in insulation is loose-fill cellulose or fiberglass blown across the attic floor. It covers every gap between joists and around wires and pipes, which batts can't do, and it's one of the most affordable ways to add R-value.

We pair it with air sealing so it actually performs, and we install baffles at the eaves so the attic can still breathe.

Installer blowing loose-fill insulation into an attic

What's included

  • Cellulose or fiberglass
  • Attic top-ups to R-49+
  • Air sealing first
  • Baffles at the eaves
  • Most attics done in a day
  • Works over existing insulation

Cellulose vs. fiberglass loose-fill

Cellulose is made largely from recycled paper treated with fire retardant. It is dense, fills gaps well and slows air movement a little better than loose fiberglass. Loose-fill fiberglass is lighter and settles less. Either works on an attic floor; what matters most is air sealing first and installing to the full depth.

How deep should it be?

To reach R-49 to R-60, blown-in insulation typically needs to be about 14 to 22 inches deep in total, depending on the material. Depth markers stapled to the joists let you check the final depth. Dry, clean existing insulation can usually stay, with new insulation added on top.

How the work is done

Material is blown through a hose from a machine outside, so very little dust reaches the living space. Most attics are done in a few hours to a day, including air sealing and baffles. If bath fans currently vent into the attic, they should be routed outside as part of the job.

Is blown-in right for you?

Blown-in is the go-to choice for open attic floors with enough room to work. It's less suited to sloped ceilings, knee walls and rim joists, where dense-pack or foam usually performs better.

Free estimates in Buffalo and Western New York

Call (716) 625-3353

Frequently Asked Questions

Cellulose or fiberglass: which is better?

Both work well when installed to the right depth over a sealed attic floor. Cellulose is denser and resists air movement a bit better; fiberglass is lighter and doesn't settle as much. We'll recommend one based on your attic.

How long does a blown-in job take?

Most attics take a few hours to a day, including air sealing.

Blown-In Insulation in Buffalo and nearby: Amherst, Cheektowaga, Tonawanda, West Seneca, Orchard Park, Hamburg, Lancaster, Williamsville, Niagara Falls, Lockport. Contact us or call (716) 625-3353 for a free estimate.

Call (716) 625-3353Free Quote

Get a Free Quote

Free on-site estimate · about 30 seconds

What do you need help with?
What type of property is it?
Where is the project?
Last step: who should the contractor call?

By submitting, you agree to be contacted by a local independent contractor about your project.

Free & no obligation